TSW202 PoE+ Managed Ethernet Switch
Managed PoE+ switch with 8 Gigabit ports, 2 SFP ports and a 240 W PoE budget.
Not in stock? We deliver on order in 1–3 weeks.
Overview
The TSW202 is a managed industrial switch with eight Gigabit Ethernet ports, all with PoE+ (up to 30 W per port, 240 W in total), plus two SFP ports for fibre uplinks. It powers cameras, access points and IP phones directly over the network cable.
As a managed Layer 2 switch with additional Layer 3 features, it offers VLANs, link aggregation (LACP), STP/RSTP, IGMP snooping, port mirroring and SNMP, as well as EtherNet/IP and MRP for ring redundancy. It can be monitored and updated through Teltonika RMS.
Anodised aluminium housing with an integrated DIN rail bracket, a 7–57 V DC input (44–57 V for PoE) and an operating range of −40 °C to 75 °C. A PROFINET variant is available on order.
Typical uses
- Powering IP cameras, Wi-Fi access points and IP phones
- Fibre uplinks between buildings or cabinets
- Industrial networks with ring redundancy (MRP)
- Separating a site network into VLANs
Key specifications
- Ports
- 8 × RJ45, 10/100/1000 Mbit/s, 2 × SFP
- PoE
- PoE+ (802.3af/at) on all 8 ports, up to 30 W each, 240 W in total
- Management
- VLAN, LACP, STP/RSTP, IGMP snooping, port mirroring, SNMP v2/v3, web UI, RMS
- Industrial
- EtherNet/IP, MRP (PROFINET as a separate variant)
- Power
- 7–57 V DC (44–57 V for PoE), 2-pin
- Housing
- Aluminium, 132 × 44.2 × 122.2 mm, 610 g, IP30, DIN rail
- Operating temperature
- −40 °C to 75 °C
An excerpt. The full specifications are on Teltonika’s product page. Product page at Teltonika →
Planning several devices? We’ll send you a quote.
Tell us the models, the quantity and where they should go. Prices on request.
Request a quote